Today, the most professional manufacturer of switching switches will introduce our products in detail. With the popularization of switching switches, we need to know more about switching switches, and understand the specifications and models of manufacturers and switching switches after purchase, so we need to understand these problems.

The switch manufacturer refers to the manufacturer that manufactures the switch. The switch is connected or disconnected by switching the switch handle, thus achieving the purpose of switching the circuit. Commonly used types of the switch are unipolar bipolar, unipolar triple, bipolar bipolar and bipolar triple. It is generally used in low voltage circuits, and has the characteristics of flexible slider action, stable and reliable performance. For more information about the specifications, models, sizes and circuit diagrams of the switch, please contact Dongguan Pinzan Electronics.

The shell of the electronic equipment with the dial key, the dial switch and the dial key of the equipment is equipped with equipment holes. The corresponding equipment holes are located on the inner wall of the shell. The ribs are equipped with clamps. The dial key includes the operation part, the equipment part and the dial part. The opening of the dial part is U-shaped. The utility model improves the uniformity of the cooperation gap between the dial key and the nested shell, improves the appearance level, improves the device sequence and device method, improves the device power, reduces the cost, reduces the bad rate of the device, and improves the operation reliability of the dial key.

It consists of an interconnected shell and a base cover. The cavity enclosed by the shell and the base cover is provided with a push, a touch bridge and a terminal. The touch bridge is an elastic metal touch bridge formed as a whole. Because some of the conductive transformations of the toggle switch supplied by the utility model directly use an elastic metal touch bridge, which combines the original touch bridge and elastic elements into one. Usually the elastic elements are tension springs or elastic fragments, and then simplifies the equipment procedures, simplifies the devices of the more complicated touch bridge and elastic elements in the process of the device, and also simplifies the components. Then, the cost of data can be reduced. Compared with the traditional layout of elastic components and touch bridge, the layout of other elastic metal touch bridges, which are all metal parts, has a very good robustness, and can be used repeatedly for a long time without being easily damaged or faulted.

The housing area is more than 700,000 square feet. Including departments: Engineering Department, Design Department, Mold Department, Injection Department, Hardware Department, Electroplating Department, Production Planning Department, Quality Department, Testing Department, Production Department and Warehouse, etc. In order to meet the needs of the market, our experienced engineers have developed new product drawings under the ISO:9001 perfect design procedure, which are handed over to the moulding department to manufacture the relevant moulds using wire cutting machine, spark machine, drilling machine, grinder, milling machine, drilling machine and other equipment.  When the die is finished, engineers will arrange for trial production, assembly and testing. Test items include product life test, plating thickness test, insulation resistance test, contact resistance test, temperature test, salt spray test, solderability test, durability test, temperature test, plug-in force test etc. A switch is produced in this way.

What is the toggle switch? I won't say much about that. As many people know, we also have a lot of articles about dialing. Dial switch is also called sliding switch and power switch (English name: SLDE SWITC, PUSH SWITCH). This switch first appeared in Japan. It was originally produced by Japanese ALPS manufacturer, which has a history of 100 years. We used imports for the first nine years in our country. Later, because of the high demand, Japan and Taiwan jointly invested in Hongda Electronics, the first domestic switch manufacturer. The latter has stopped production because of poor management. Later, even more cattle factories are now facing the same treasure of crisis. It seems that it is not necessarily good to be bigger, ha ha.

The General specifications of switching switches: SS (straight handle), SK (horizontal handle), BK, LS, TS are all the direction of the finger handle, which I think everyone knows very well; the types are divided into: micro, horizontal handle, straight handle, large current, small pull, slide, patch; gear: one, two, three, four, five; foot is divided into: single row three feet, single row four feet, single row five feet, single row five feet. Row six feet, row seven feet, row eight feet... the highest is to 12 feet, row three feet, row four feet, row six feet... the highest is row twelve feet, row three feet, row eight feet... the most is 12 feet, four rows and five rows are the same foot position; the degree of power is: 100g, 150g, 250g, 350, 400g positive and negative tolerances are 30g, which is a relatively precise force at present. It's very ergonomic.

The manufacturer and model selection of the switch must pay special attention to these problems, when we understand, we will know more.